Material for making MT table.

After a month of study and accumulation I arranged following material for my first MT table.

1) LCD Screen - Moserbear 18.5 in, {6000 INR}.
2) Web Cam - Quantum QHM 500 LM CAMERA, {525 INR}.
3) Acrylic Sheet - 11x18 in, {75 INR}.
    [EDIT] the first sheet become unusable as it come exact the size of LCD so will now use it below LCD.
    New 12x24 in 6mm sheet {600 INR}.
4) IR LEDs - 50x, 940nm 1.2v 100ma {415 INR]
    Resistors - 56ohm 1/8 w for 10x LED series {FREE}
                      5 ohm for 15x LED series {FREE}
    Old Laptop adapter 18.5v 3.6A for LED power supply {From Surplus}.
5) Tools - Sand paper (150 and 1500 mark) {25 INR}
                File wide (100 mark) {10 INR}
                Brasso {50 INR}
                Soldering iron and wires.
                Hexa Blade {8 INR}
[EDIT]
6) Compliant surface: Silicon Spray (to be tested)

There are more thing to be arranged, but right now I am starting with this much.

It took 4 hrs distributed in 2 days to file the Acrylic edges, I did not got the clear glass finish but I think it should work.

Will be testing the FTIR without LCD first then will add LCD in weekend.